Star Micronics Multi-Font XR-1020 Manuale Utente Pagina 30
- Pagina / 110
- Indice
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
INTERFACE CARTRIDGES
You can use the RS-232 Serial Interface with the optional Serial Interface
Cartridge (IS-8XL), or extend the print buffer by installing the .optional
Buffered Parallel Interface Cartridge (IP-128XL), instead of the Standard
Interface Cartridge.
If you want to use the Serial Interface Cartridge, set the DIP switches on the
board before install it to the printer.
1. Turn off the power switch and disconnect the power cord from the power -
source.
2. Disconnect the interface cable if attached.
, -
3. Compress the projected parts on the right and left, and pull the Standard
Interface Cartridge to remove it from the printer.
-
Flgurr 312. Remove the Standard Interface Cartridge from the printer.
4. Insert the optional Interface Cartridge securely into place. If it is not fully
inserted, the printer will not properly print.
5. Connect the interface cable to the connector.
NOTE : Store the removed Interface Cartridge in a safe place.
-
22
-
- XR-1020 1
- XR-1520 1
- HOW TO USE THIS MANUAL 3
- OF CONTENTS 5
- ON LINE button 6
- 7 PRINTER CONTROL COMMANDS 7
- 8 DOWNLOAD CHARACTERS 7
- Chapter 11 REFERENCE 8
- COMMAND SUMMARY 8
- Chapter I 9
- PRINTER COMPONENTS 10
- FONT STYLE EXAMPLE 12
- SETTING UP THE PRINTER 13
- UNPACKING AND INSPECTION 14
- SETTING UP 16
- Mounting the platen knob 16
- Print head 18
- Print head shield 18
- Interface cable 19
- Chapter 3 21
- Transparent part 22
- (SF- 1 ORMWI5RMII) 26
- -. - _ - . 28
- _ .- -.. 28
- Pull Tractor Un’ 29
- INTERFACE CARTRIDGES 30
- Cartridge 31
- PAPER INSTALLATIONAND USE 33
- LOADING FANFOLD FORMS 35
- (Push feed) 36
- Tractor cover 37
- Clamp lever 37
- Release lever 40
- Clamp lever 41
- Pull tractor unit 41
- Paper parking 42
- Paper unparking 43
- LOADING SINGLE SHEETS 44
- Paper loading lever 47
- [Single-Bin] 47
- Paper loading leve 48
- Chapter 5 49
- ON LINE button 50
- PAPER FEED button 50
- SET/EJECT/PARK button 51
- PITCH button 51
- MODE button 52
- FONT button 52
- ,t,, UPLh 53
- Long test mode 54
- Print area test mode 55
- Pitch lock mode 55
- Font lock mode 55
- Pitch and Font lock mode 55
- Hexadecimal dump 56
- Top of form 58
- Forward micro-feed 59
- Reverse micro-feed 59
- Selecting the print color 60
- Indicators 61
- Store Macro Definition 62
- SETTING UP THE 63
- MEMORY SWITCHES 63
- ON LINE 1 64
- ON LINE 64
- Print current settings 65
- Installation menu 66
- Font menu 67
- Character menu 67
- Print menu 68
- Paper menu 69
- Forms menu 69
- Factory settings 70
- DOT ADJUSTMENT MODE 71
- 1 ONLINE I--) 72
- ,:lL i-J-- it 72
- Chapter 7 73
- FONT CONTROL COMMANDS 74
- Select italic characters 75
- Se/ect NLQ font 75
- Select font 75
- Start underlining 77
- Stop underlining 77
- Star? 0 verlining 77
- Stop 0 verlining 77
- Superscript 78
- Subscript 78
- CHARACTER SET COMMANDS 79
- Select IBM code page 80
- Pica pitch 82
- Elite pitch 82
- Condensed printing 82
- Cancel condensed printing 82
- Expanded printing 83
- Cancel expanded printing 83
- Select proportional spacing 83
- I Decimal 84
- I <ESC> “!” n 84
- Select character size 85
- Return to normal height 86
- VERTICAL POSITION COMMANDS 87
- Execute <ES6 “A” 88
- Line feed 88
- Reverse line feed 88
- Feed paper n lines 89
- Set page length to n lines 90
- Set page length to n inches 90
- Set bottom margin 90
- Cancel bottom margin 90
- Form feed 90
- Disable paper-out detector 91
- Enable paper-out detector 91
- Set vertical tab stops 91
- Select vertical tab channel 92
- Vertical tab 92
- Set left margin 93
- Set right margin 93
- Left justify 95
- Center text 95
- Right justify 95
- Full justify 95
- Set horizontal tab stops 96
- Reset all tab stops 96
- Horizontal tab 96
- Relative horizontal tab 97
- GRAPHICS COMMANDS 98
- Select graphics mode 99
- Convert graphics density 99
- Select g-pin graphics mode 100
- 2730 Od 101
- 10 26 00 nl 101
- 27 38 0 nl 10 26 00 nl 102
- 14 m0 ml m2 102
- Select ROM character set 105
- Select print color 106
- Set MSB to 1 107
- Set MSB to 0 107
- Accept MSB as is 107
- Delete last character sent 107
- Cancel last line 107
- Set printer off-line 108
- Set printer on-line 108
- Bi-directional printing 108
- Uni-directional printing 109
- Manual feed 109
- Auto feed 109
- Select ASF bin #1 110
- Select ASF bin #2 110
- Eject paper from ASF 110
- Reset printer 110
Prodotti e manuali riguardandi Stampa e scansione Star Micronics Multi-Font XR-1020
(152 pagine)
(147 pagine)© 2020, manymanuals.it. Tutti i diritti riservati | 0.060 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commenti su questo manuale